Receiving Converters

SPECIFICATIONS:

• Circuit: 2 FET's for rf ampl and mixer.
• Noise figure: 1 to 2 dB.
• Gain: 20dB typical.
• Connectors: BNC on case; RCA on board.
• In/out impedance: 50 ohms.
• Power: +13.6Vdc @ 30-40 mA.
• Size of case: 4 x 4 x 2 inches.

Note: UHF receiving converters are no longer available.  We ran out of boards and must redesign to be able to offer them again.  There doesn't appear to be enough demand to justify doing so.

CONVERTER PRICES: 

(Ship wt. 1 lb.)

CC50, CC144, CC145, CC146 wired/tested less case ...$99.00

CC50, CC144, CC145, CC146 wired/tested in case ...$139.00

Units use surface mount technology for best performance; so they are only available factory built.

Be careful not to confuse input and output ranges;
Input is what comes in the antenna, output is what goes into your receiver.

You may also be interested in these related accessories:

Click here A5 RCA plug to connect to board.

See what our customers have to say:

Dear Hamtronics:  I received the 145 - 10m receive converter for use on satellite operations - works perfectly.  If you ever get a call or letter asking if you can put your receive converter in line with a 2.4ghz - 145 MHz converter in front of your converter, the answer is - YES!  Does a great job and allows me to use the better receiver and filtering capability of my Kenwood TS930 for working the AO-40 Satellite.... Pat, WX3J, San Angelo TX